Product Description
Product Details
Based on the appearance of the valve in the picture and the markings "DN80, PN10/16, GS - C25 (presumed, as the handwriting is not entirely clear and may be related to the identification of cast steel material)", it is rather difficult to fully know the complete product details. Combining knowledge of conventional gate valves with this information, the following can be summarized:
1. Basic Parameters
- Nominal Diameter (DN): DN80 means the nominal diameter of the pipeline for which the valve is applicable is 80mm, which determines the medium flow capacity.
- Nominal Pressure (PN): Marked with PN10/16, it indicates that the rated working pressure of the valve at the reference temperature may be 1.0MPa or 1.6MPa (specific confirmation is required in combination with standards), and it is used to match the pressure level of the pipeline system.
- Material: Judging from the wording such as "GS - C25", it is most likely cast steel material (such as materials conforming to relevant cast steel standards). Cast steel has good strength and toughness and can adapt to certain pressure and temperature working conditions. However, for the specific chemical composition, mechanical properties, etc., it is necessary to check the product material report or contact the manufacturer for confirmation.
2. Structure and Type
Judging from the appearance, it is a gate valve with flange connection. The gate valve controls opening and closing by the lifting of the gate plate, and the flange connection is convenient for installation, disassembly and maintenance. However, it is difficult to determine only from the appearance whether it is a rising stem or a non - rising stem, whether it is a wedge - type single gate plate or a double gate plate and other finer structures, and it is also impossible to accurately determine the sealing form (soft seal/hard seal, which needs to be combined with the internal valve seat structure or product description).
3. Application Scenarios
If it is a conventional cast steel gate valve, it is generally applicable to pipeline systems for media such as water, steam, and oil products, and is used to cut off or connect media. It may be used in industrial water supply and drainage, petrochemical, heating and other systems. However, for the specific applicable medium temperature and working condition limits (such as maximum temperature and pressure), reference must be made to the product technical documents.
If you want accurate and comprehensive product details, it is recommended to find the product manual of the valve, or contact the manufacturer/supplier, and provide information such as the valve model and batch number, so that they can provide complete parameter data including material certification, pressure - temperature rating, sealing performance, applicable standards, etc.
Packaging & Shipping
Company Profile
Rooted in a legacy of excellence, Tianjin Auswell Valve Co., Ltd. proudly adheres to a multitude of international standards including those from China, Germany, Britain, America, Japan, and Australia. Our versatile range spans nominal diameters from DN15 to DN3000, pressure classes from 0.60 Mpa to 6.4 Mpa, and is capable of operating within temperatures from -20°C to 150°C. With a rich palette of materials like gray cast iron, ductile iron, cast steel, stainless steel, and duplex steel, our repertoire includes precision-crafted soft-sealed butterfly valves, soft-sealed gate valves, check valves, filters, ball valves, globe valves, balance valves, and diaphragm valves.
Driven by a relentless pursuit of perfection, Tianjin Auswell Valve Co., Ltd. has significantly bolstered its management framework in recent years to meet and anticipate our clients' needs. We've proudly garnered the prestigious ISO9001 Quality Management System Certification and the esteemed British WARS Drinking Water Certification. Our product offerings, celebrated for their reliability, have made their mark across Europe, Asia, Africa, and beyond, earning widespread acclaim and trust from our clientele. Upholding our commitment to quality, we at Auswell Valve Co., Ltd. are eager to collaborate fully with peers in the valve industry. Together, we strive to elevate Chinese craftsmanship onto the global stage.
Tianjin Auswell Valve Co., Ltd. It is nestled in a storied historical town in China, a place celebrated for its rich military legacy and famed for its rice cultivation. Industrial Park, Xiaozhan Town, Jinnan District, Tianjin. Here, our company boasts comprehensive production capabilities, from innovative product design and precise mold manufacturing to advanced machining, meticulous rubber smelting, epoxy spraying, and rigorous valve assembly and testing.
With state-of-the-art processing equipment and exquisite craftsmanship, we assure that every product aligns with national or international standards, reflecting our commitment to excellence. Our dedication to superior craftsmanship ensures that we deliver only the highest quality products to our valued customers.
Rooted in a legacy of excellence, Tianjin Auswell Valve Co., Ltd. proudly adheres to a multitude of international standards including those from China, Germany, Britain, America, Japan, and Australia. Our versatile range spans nominal diameters from DN15 to DN3000, pressure classes from 0.60 Mpa to 6.4 Mpa, and is capable of operating within temperatures from -20°C to 150°C. With a rich palette of materials like gray cast iron, ductile iron, cast steel, stainless steel, and duplex steel, our repertoire includes precision-crafted soft-sealed butterfly valves, soft-sealed gate valves, check valves, filters, ball valves, globe valves, balance valves, and diaphragm valves.
Rooted in a legacy of excellence, Tianjin Auswell Valve Co., Ltd. proudly adheres to a multitude of international standards including those from China, Germany, Britain, America, Japan, and Australia. Our versatile range spans nominal diameters from DN15 to DN3000, pressure classes from 0.60 Mpa to 6.4 Mpa, and is capable of operating within temperatures from -20°C to 150°C. With a rich palette of materials like gray cast iron, ductile iron, cast steel, stainless steel, and duplex steel, our repertoire includes precision-crafted soft-sealed butterfly valves, soft-sealed gate valves, check valves, filters, ball valves, globe valves, balance valves, and diaphragm valves.
Driven by a relentless pursuit of perfection, Tianjin Auswell Valve Co., Ltd. has significantly bolstered its management framework in recent years to meet and anticipate our clients' needs. We've proudly garnered the prestigious ISO9001 Quality Management System Certification and the esteemed British WARS Drinking Water Certification. Our product offerings, celebrated for their reliability, have made their mark across Europe, Asia, Africa, and beyond, earning widespread acclaim and trust from our clientele. Upholding our commitment to quality, we at Auswell Valve Co., Ltd. are eager to collaborate fully with peers in the valve industry. Together, we strive to elevate Chinese craftsmanship onto the global stage.
After Sales Service
Our advantage :Hoswell valve company distinguishes itself with a comprehensive set of strengths. We possess in - house independent R & D capabilities, backed by state - of - the - art processing equipment. Our manufacturing processes adhere to industry - leading standards, and we operate a rigorous quality control system.
Product Quality Assurance
Quality Commitment and Inspection: Before leaving the factory, valves need to undergo strict quality inspections, such as pressure tests, sealing tests, etc. It is ensured that there are no casting defects like sand holes or air holes in the valves, and there are no bruises or scratches on the flange sealing surfaces. The markings of flow rate, direction, nominal pressure, diameter, material, etc. are clear and complete. It is promised that the valves are produced and inspected in accordance with national standards, and unqualified products will not leave the factory.
Warranty Period Service: Provide a certain period of warranty service. During the warranty period, for malfunctions caused by product quality problems, the manufacturer will repair or replace parts free of charge.
Technical Support
Pre-sales Consultation: Before customers purchase valves, provide them with professional technical consultations, including suggestions on product selection, specification parameters, material characteristics, applicable working conditions, etc., to help customers choose the most suitable valve products.
Installation Guidance: Provide installation guidance services, which can be carried out online (such as by phone, video, installation manuals, etc.) or offline (by sending technicians to the site) to ensure that the valves are installed correctly and avoid problems caused by improper installation.
Usage Training: Provide usage training for customer operators, enabling them to be familiar with the operation methods of the valves, key maintenance points, knowledge of troubleshooting common faults, etc., and improving the customers' ability to use and maintain the valves.
Supply of Maintenance Parts: Ensure the timely supply of maintenance parts. For the damage of parts outside the warranty period, provide the parts at a reasonable price (such as the cost price).
Regular Follow-up Visits: Regularly conduct follow-up visits to customers, understand the usage situation of the valves, and collect customers' feedback opinions, so as to improve the products and services.
FAQ
1) Q: Are you a manufacturer or trading company?
A: Hoswell Valve is a professional valve manufacturer with experienced R&D team.
2) Q: Do you have any agent or representative abroad?
A: Yes, we have agents in some countries, they can offer local service for you.
3) Q: What kinds of valve can you supply?
A: We can supply butterfly valve, ball valve, check valve and so on.
4) Q: Do you have any certificate for the valves?
A: Yes, we have CE, BV, ATEX, TS and so on.
5) Q: What's the delivery time?
A: If all the parts of the valve are ready in stock, the valves can be delivered within 7~10 days.
6) Q: What are the countries or regions you supply valves?
A: Hoswell valves have been supplied to USA, Europe, Australia, Singapore, South Africa and so on.
){kind=link}